MoreExam
1. Question Content...
EXPLANATION
Answer: X - EXPLANATION Content.
Question1: A 3-node All-Flash vSAN cluster has this configuration:* One disk group per host* All disk groups have identical make & model disks of an 800GB NVMe SSD cache and 2x 4TB SAS SSDs each An administrator has been tasked with expanding storage capacity by adding one additional disk group with this configuration:1.6TB SAS SSD cache and 1x 4TB SAS SSDsAssuming all the disks are compliant with the vSAN HCL, which is true?
Question2: An administrator wants to orchestrate the update of the controller driver and firmware in a vSAN cluster.Which is a required step when using VMware vSphere Update Manager and vSAN Health Service to perform the updates?
Question3: A higher level of resiliency has been requested for an existing vSAN Stretched Cluster. A key requirement will be the addition of a third site to protect against a potential double site failure of the two mirrored sites in the stretched cluster.D18912E1457D5D1DDCBD40AB3BF70D5DWhat solution would meet the resiliency requirement?
Question4: What is the correct power down sequence for shutting down all nodes in a vSAN cluster with vCenter on the vSAN datastore?(Place the first selection in the sequence at the top of the list, followed by the second, and so on until the last selection is at the bottom of the list.)
Question5: Which storage policy can be assigned to virtual machines In a 5-node, all flash vSAN cluster, to provide the highest level of redundancy?
Question6: An administrator needs to perform an urgent maintenance activity on a host that is part of a 3-node vSAN cluster. All the disk groups in the cluster are balanced. They need to choose a maintenance mode option to ensure:*There is no downtime to any of the virtual machines running in the cluster*Virtual Machine accessibility is maintained*No data is left on the host that could possibly cause data lossWhich statement is true if the administrator chooses 'Ensure accessibility' as the maintenance mode option?
Question7: Which Kubernetes information is exposed in the vSphere Client to help a vSAN administrator filter Container Volumes based on their usage?
Question8: An administrator arrives at work and begins their morning checks on a four node, all-flash vSAN Cluster.They notice the vSAN datastore reached 99% capacity due to a single node failure.How can the administrator provide temporary relief?
Question9: Which must be configured by a Kubernetes user allow for dynamic provisioning of container volumes in vSAN using storage policies?
Question10: An administrator observes this health check warning:Controller firmware is VMware certifiedThey proceed to update the latest firmware on the Storage Controller. After a successful firmware upgrade, the same health check alert continues to display.Which statement is true?
Question11: A solution architect is considering a vSAN Cluster with two hosts per rack. The design should be configured to minimize the potential exposure to rack failure with the capacity to automatically restore compliance with the configured vSAN storage policy.Which design consideration would minimize potential risks?
Question12: Where would an administrator enable deduplication and compression in a vSAN environment?
Question13: An infrastructure architect is submitting a proposal for a vSAN Cluster. These are the customer's requirements:*Maximize the amount of usable capacity.*Deduplication and compression will be enabled to help maximize usable capacity.Which disk group configuration should the architect include in their design?
Question14: Which is true of the vSAN iSCSI target service?
Question15: Reference the exhibit.A university campus has a site topology illustrated in the exhibit. Adjacent connected buildings are connected with a single 40gb layer 3 network with a RTT of 0.6ms as depicted by each line. An architect wants to configure a fault domain in each building.What would the architect need change in order to implement a fully supported vSAN Cluster?
Question16: An administrator would like to put a vSAN host in an existing vSAN Cluster in maintenance mode. vMotion is configured and DRS is set to Fully Automated and all other advanced settings are their defaults.The administrator uses this PowerCU command:Set-VMHost -VMHost "esxi-hoat01.corp.local" -State "Maintenance"What is the default behavior?
Question17: Which is true about vSAN fault domains?
Question18: Refer to the exhibit.D18912E1457D5D1DDCBD40AB3BF70D5DA vSAN Cluster stretched across Data Site 1 and Data Site 2 has a vSAN data network configured with an MTU of 9000. The witness node has been placed in a remote site across a WAN with an MTU of 1500. The vSAN health check, 'vSAN: MTU check (ping with large packet size) , reports a failed ping.What two actions could resolve the issue? (Choose two.)
Question19: What are two factors to consider prior to placing a vSAN node into Maintenance Mode with full data migration? (Choose two.)
Question20: An infrastructure architect is designing a vSAN Cluster that must satisfy these requirements:* support storage policies with 2 failures - RAID-1 (Mirroring)* support storage policies with 2 failures - RAID-6 (Erasure Coding)virtual machines must maintain compliance with the storage policy rules above when one host is in maintenance mode with full data migration What is the minimum number of hosts needed to achieve these design requirements?
Question21: Which must be configured by a Kubernetes user to allow for dynamic provisioning of container volumes in vSAN using storage policies?
Question22: A customer has lost connectivity to one of their sites In a vSAN Stretched Cluster.When connectivity is restored, what DRS setting will ensure VMs are not migrated back before resyncs are complete?
Question23: An architect has been asked to plan the Impact of a storage policy change to one of the production All-Flash based vSAN datastores. The change will reduce the failures to tolerate value from 2 to 1 for objects with a RAID-1 (Mirroring) layout in the existing policy. This change will be applied to multiple VMs.Which statement is correct in this scenario?
Question24: An administrator is patching a production Stretched Cluster using VMware Update Manager.Which statement is accurate?
Question25: Refer to the exhibit.An administrator is managing a 4-node, hybrid vSAN cluster. One of the hosts in the cluster went offline.Referencing the information displayed in the section of the vSAN UI, what is the current state of this cluster?
Question26: An All-Flash vSAN cluster has 4-nodes with this disk group composition on each host:* 1 x 800 GB SAS SSD* 6 x 3.84 TB SATA SSDAn administrator observes that in an All-Flash cluster, the WriteBuffer Free Percentage is consistently low. As a result there is increased latency experienced by the workloads.Which remediation steps will resolve this issue?
